Home > Hp Photosmart > Hp Printer C3180 Check Print Cartridge Error

Hp Printer C3180 Check Print Cartridge Error

Contents

Use both hands to pull any whole sheets of paper to avoid tearing them. Figure : Remove the cartridge The tri-color cartridge is on the left. Disconnect the power cord from the rear of the product. The self-test report prints. Source

Step one: Remove any loose paper from the tray Remove any loose sheets of paper from the input tray and the output tray. This advice can be used to combat the 'Check Ink Cartridges', 'Check Cartridges and a variety of other Hewlett Packard inkjet printer error messages. Macintosh users: skip to the next step. If the On/Resume light does not blink, you cannot tell which cartridge is the problem cartridge. his comment is here

Hp Photosmart C3180 Ink Cartridge Problem

The rear access door or two-sided printing accessory (duplexer) might not be closed or is not locked into place. If the product never finishes the task, and the lights continue to blink, continue to the next solution. If any torn pieces of paper remain inside the product, more paper jams are likely to occur. Push the power cord into the rear of the product to make sure that the connection is secure.

  • The Print window opens.
  • Slide the paper width guide to its outermost position.
  • For example, if you are printing on 101.6 x 203.2 mm (4 x 8 inch) envelopes, type 4 in the Width box, and type 8 in the Length box.
  • The video contains no audio. If you have trouble viewing the video or to view the video in a different size, view the video on YouTube.

To check the cartridge compatibility for your product, click this link, HP SureSupply . Figure : Close the cartridge access door Step six: Align the cartridges After the product prints a cartridge alignment sheet, follow these steps to align the cartridges. I contacted HP and theyregret they can't help me because of warranty run out.they thinkit is apparent that the problem is related to the hardware functionality of the PC/unit. Hp Deskjet 1510 Error Lights Cartridges marked with a square or pentagon, go into the right carriage slot.

Clear any obstructions you find. Hp Photosmart C3180 Troubleshooting Experiencing frequent or recurring paper jams? Click here to skip to Step 3, "Remove and reseat the problem cartridge" below - you only have to perform the steps on the problem cartridge. More hints Print a test page.

Disconnect the power cord from the rear of the product. Hp C3100 Click the Windows icon (), and then click Computer. Make any desired setting changes, and then click Scan. Thriftyink 218,127 views 2:41 Dirty Secret Revealed HP 56, 61, 75, 901 Cartridge Refill video, Inkmizer.com, America - Duration: 7:16.

Hp Photosmart C3180 Troubleshooting

If any torn pieces of paper remain inside the product, more paper jams are likely to occur, and this could damage the print mechanism. http://h30434.www3.hp.com/t5/LaserJet-Printing/Remove-and-check-print-cartridge-error-sign/td-p/1181031 Torn, wrinkled, or damp paper loaded in the paper tray. Hp Photosmart C3180 Ink Cartridge Problem If the test page does not print, continue with the next solution. Hp C3180 Not Printing megasysfix19 1,325,468 views 7:29 How to fix a HP Printer, not printing black ink and missing colours. - Duration: 3:00.

Get news about the products and tech you really care about. this contact form Issue: The Power light blinks quickly for 20 seconds, and then stays on In this error condition, the following blinking lights pattern displays on the control panel: Also, the product does Step two: Check the paper path If the product is not on, press the Power button () to turn on the product. Step two: Print a self-test report Press and hold the Cancel/Resume button (), and then press the Start Copy Color () button. Hp Psc 1510 Troubleshooting Flashing Lights

Step one: Reset the All-in-One Follow these steps in the order given to reset the product. If the Start Copy Color light is blinking, the cartridge on the left is the problem cartridge. Step two: Try the task again Try the task again, and then wait a couple of minutes for the task to complete. have a peek here If the issue persists, continue to the next solution.

Step one: Reset the All-in-One Follow these steps in the order given to reset the product. Hp Photosmart C3180 All-in-one Printer HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend If there is no computer message, look at the Start Copy lights - if the Start Copy Black light is blinking, the cartridge on the right is the problem cartridge.

Reply 0 0 « Message Listing « Previous Topic Next Topic » Related Documents HP Printers - Using HP Diagnostic Tools for HP Printers in WindowsHP Printers - After Windows 10

The Power light () will blink during the alignment process, and will stop blinking when the alignment is complete. If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting. The self-test report prints. Hp Printer Support Issue: The Start Copy Black light and the Power light are blinking In this normal condition, the following blinking lights pattern displays on the control panel: Power light: Blinking Check Paper

Sign in to report inappropriate content. Solutions Solution one: Restore the connection between the All-in-One and the computer Follow these steps to make sure that the product is communicating with the computer. Make sure that no scraps of paper are stuck between the rollers. Check This Out Double-click Digital Imaging.

This page requires Javascript. Make any desired setting changes. Avoid touching the nozzles. If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting.

Slide the two pins on the right side of the door into the two holes on the right of the product, and then snap the left side into place. Figure : Electrical contacts and nozzles Copper electrical contacts Nozzles Check the electrical contacts for debris. Do not print on paper with paper clips or staples attached. Figure : Print carriage contacts Step Three: Repeat reseating and cleaning steps If the problem is not solved, repeat the reseating and cleaning procedures above.

If the issue persists, continue to the next solution. For example, if you are printing on 101.6 x 203.2 mm (4 x 8 inch) envelopes, type 4x8 envelopes. HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend Press the Power button () to turn off the product.

How do I print an envelop using an HP C3180 printer and my Mac? Techipedia 399,325 views 2:30 HP ink cartridges with print-head, not recognized, missing, damage, chip problem, common problems - Duration: 7:59. Double-click Local Disc (C:). If the voltage and amperage specifications of the product and the power supply are compatible, make sure that the connector on the power cord is the same shape and size as

Method three: Scan with HP scan application Perform the following steps if you are unable to scan directly from HP Solution Center in Windows Vista. Gently remove any jammed paper. Solution eight: Service the All-in-One If you have completed all the steps and are still experiencing a problem, continue to the Service the All-in-One section at the end of this document. This page requires Javascript.

If the carriage is stuck on the left side of the product, move the carriage to the right side of the product.