Open RPM, double-click the queue that is printing to the HP Laserjet 1000 printer, press the Printer Setup button, and select the new printer you installed. Remove the input tray cover. 4. So if you dont want to go thru a lot of "stuff" just add foo stuff thru PM and then pick the 990.... I have printed several docs and it looks OK. Source
Reconnect it to the printer and the computer. 3. Replace the input tray cover. 4. If the printer isn't detected, something is wrong. 3. Thanks The same response I had from Christ University & asking me to give the brief method.
The DOS driver gives a "Write Fault" error if the checkbox in the Details tab/ Ports, Spool MS DOS Print Jobs options is not checked. 1.
Please try again later.
In Ubuntu, there are still other changes.
PRINTER DETECTION The basic check for whether your printer is being detected by CUPS is this: lpinfo -v You should see a line beginning with "direct usb:/".
Run this command to see if usblp is loaded: lsmod | grep usblp If the output lists usblp, then it is loaded and I'm afraid your problem is beyond the scope
Remove any paper from the back of the printer.
Finally we succeeded after following the below procedures. 1.
How can I print from RPM to the HP Laserjet 1000 printer?
If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise. From the File menu in the software application, click Print. The system returned: (22) Invalid argument The remote host or network may be down. The typical reason (assuming you have the firmware file) is that the usblp kernel module isn't loaded. ** Skippable Details ** In CUPS 1.4, there were some changes to the USB
Error messages do not appear on computers that access the printer through Windows-sharing. In the process I've found many people on the Internet reporting similar problems, so this guide is intended to document the issues people are likely to encounter, and their solutions. Close the toner cartridge door completely before attempting to print. http://h20564.www2.hp.com/portal/site/hpsc/public/psi/manualsResults?sp4ts.oid=45674 Recent products: HP LaserJet 1000 Printer Troubleshoot a problem Help Other Knowledge Base options Search HP Support Center Top issues Most viewed solutions Advisories, bulletins & notices Manuals Setup & install
Kindly give us solution in a very brief method with warm new year greetings joshy for christ university I had replied to the above mail by giving them brief steps to If printing is successful, the program that was just closed was interfering with the print job. Now, I have lost the software that came with it. Click Cancel and change the print quality setting to 300 dpi.
However, would you be so kind as to consider rewriting it so as to clearly separate the one-time activity involved (e.g., driver compilation) from the each-time-you-turn-on-printer activity? http://domcached.com/hp-laserjet/hp-laserjet-1000-spooler-error.html Adv Reply March 10th, 2011 #7 anant_crp View Profile View Forum Posts Private Message First Cup of Ubuntu Join Date Dec 2010 Beans 11 Re: HP LaserJet 1000 series problem NOTE: Do not rip the paper. 5. Close the toner cartridge door and the straight-through output door.
This, instead, has worked just fine: http://ubuntuforums.org/showpost.php...75&postcount=6 Thanks Last edited by dulinux; December 25th, 2010 at 07:50 PM. I ran the command: sudo /usr/bin/getweb 1020 And the needed file was loaded and installed. If you don't see a firmware file there (or if it could be the wrong firmware), you can fetch the firmware with this command: sudo /usr/bin/getweb 1020 Replacing "1020" with the http://domcached.com/hp-laserjet/hp-laserjet-2100-troubleshoot.html These printers have always been a bit problematic, and with recent CUPS versions have become even more problematic.
Open the toner cartridge door. 2. Click Retry on the computer screen. Open the straight-through output door. 3.
This only requires at the first time.
Password Register FAQ Members List Calendar Today's Posts Search Printing problems on HP Laserjet 1000 Thread Tools Search this Thread Rate Thread Display Modes #1 12-14-2004, 01:01 PM If you have an active support agreement or HP Care Pack, you can link them to your profile to ensure access to all services. Try the procedures once again & get back to me. Recent products: HP LaserJet 1000 Printer Manuals Help Other Knowledge Base options Search HP Support Center Top issues Most viewed solutions Advisories, bulletins & notices Troubleshoot a problem Setup & install