Press 4. Tray 3 Paper Sizes 1 Table 1-9. Page 196: Color Printing Problems 1 Printer information pages learn how to print a configuration page. No action necessary.
Select Manuals. You can also try to find the appropriate schematic diagram for kindred Printer HP models by clicking on the links shown below. Available for the HP Color LaserJet 3700 series printer. Press 17. More hints
Hp Color Laserjet 3500 Front Door Stuck
Page 178 13. Trays. The printer memory DIMMs (available on the HP Color LaserJet 3700 series printer only) are defective or installed incorrectly. Close the lower rear door (rear output bin).
See Secondary transfer roller engaging/disengaging control.
Lift the front door handle and pull down the front door.
The bottom slot is for the firmware DIMM.
For example, when printing text at 5% coverage, an HP print cartridge lasts an average of 4,000 or 6,000 pages, depending on the printer model.
Guide the left side of the transfer unit into the front door of the printer. Page 79: Installing The Print Cartridge Installing the print cartridge 1. Good luck to the repair! Hp Jetdirect En3700 After 15 seconds, the power/status LED light and the USB printer LED light appear green.
Two people must lift and move the printer. Hp Color Laserjet 3500 Transfer Kit Page 57: Jam Recovery, Language This might cause overall printer performance to suffer. ● OFF. Supply storage requirements ................13 Table 1-6. her latest blog You can override this setting in the printer driver.
Page 113 3. Hp 3500 Printer Replace the DIMM access door by inserting the tabs on the door into the slots on the printer. Select paper that can tolerate temperatures of 190°C (374°F) for 0.1 second. Page 96 3.
Hp Color Laserjet 3500 Transfer Kit
Extend the paper extension tray. https://www.manualslib.com/manual/72280/Hp-3550.html ENWW Solution Select manual duplexing (2-sided). Hp Color Laserjet 3500 Front Door Stuck Page 43: Hewlett-packard Warranty Statement Hewlett-Packard warranty statement HP PRODUCT DURATION OF LIMITED WARRANTY HP Color LaserJet 3500, 3500n, 3550, 3550n, 3700, One-year limited warranty 3700n, 3700dn, and 3700dtn printers HP Hp 3700 Service Manual You must have Internet access to use any of these links.
Page 15: Using The Printer User Guide—Detailed information for using and troubleshooting the printer. Page 123: Replacing The Transfer Unit 6. Press 4. For instructions on clearing paper jams, see Paper jam locations (shown without optional Tray 3) output bin paper path Tray 1 input trays duplex path path to lower rear door (rear Hp Color Laserjet 3700 Printing Problems
Paper path troubleshooting 3page 380................................................................................................................................................................ Page 152 For 68.0 errors, turn the printer off and then back on. This message is displayed until an HP supply is installed is pressed. Height: 862 mm (34 in.) Depth: 1480 mm (58.3 in.) Width: 699.5 mm (27.6 in.) Electrical specifications Power requirements are based on the country/region where the printer is sold.
NOTE A loss of data will occur. Clearing paper jams for more information. HP produces a selection of paper that is designed for the HP Color LaserJet 3500/3550 and 3700 series printer.
Page 132: To Replace The Pickup Roller 12.
Formatter PCB (HP 3700) removal (2 of 2) ..........281 Figure 6-121. Page 145 Block functions CPU (IC1001) The 16-bit single-chip microcomputer that constitutes the CPU incorporates ROM and RAM and controls the following operations of the printer according to the control programs Remove the lower rear door (rear output bin). 5. Open Tray 2 and Tray 3 (if necessary), and remove the orange shipping lock inside each tray.
Page 174: Jam Inside The Fuser Area 1. Page 91: Printing On Special Media 7, Transparencies 7, Glossy Paper, Colored Paper 7, Envelopes 7 Hewlett-Packard recommends using HP Color LaserJet Soft Gloss paper with this printer. If a cartridge is in the wrong slot or the wrong type for the printer, the control panel will NOTE display the message, INCORRECT ... After a short time, the printer control panel might display the message NEW FUSER KIT. 10.
Page 40: Print Media Specifications, Supported Media Weights And Sizes, Table 1-8. Do not touch the top of the transfer unit or the WARNING! Press 16. No action necessary.
Turn the printer on. The NOTE printer control panel displays the message 13.XX.YY JAM REMOVE TRAY 2. 1. See... Turn the printer on.
Press 7. Use the blue handles on both sides to hold the transfer unit. You can set the length of time before the printer goes into PowerSave mode to 1 HOUR, 2 MINUTES, 30 MINUTES, 4 HOURS, 4 HOURS, 15 MINUTES, or 15 HOURS.